Axel Joost Elektronik, Polarity Changer

Indian motorcycles switch the outputs for the turn signals to minus; when active. This make a change of the original turn signals against aftermarket turn signals a bit tricky. This polarity changer is the solution. It converts the ground switched signal from the BMC (Body Control Module) or turn signal relay to a positive supply voltage for the turn signals. The module contains 2 separate channels. The maximum load is 60 Watt per side. With the green "Mode" cable you can decide if the outputs are switched on or off for 0;5 seconds when power on the module. This prevents the outputs against wrong signals; when the power is switched-on; when a connected control box needs a bit more time to power up.

Fitment: Indian Motorcycles with minus switched turn signals