• CONTACT FOR INFORMATION ON STOCK AVAILABILITY: contact@aftermarket-custom-parts.com
Motoscope Pro BMW R9T

Motoscope Pro BMW R9T

Quantity CONTACT FOR INFORMATION ON STOCK AVAILABILITY: contact@aftermarket-custom-parts.com

€422.48
Tax included

Motoscope Pro BMW R9T

For BMW R9T 2014, 2015,2016

Not compatible with BMW models R nineT Model 2017 and later, R nineT Urban G/S, R nineT Pure, R nineT Racer, R nineT Scrambler

categories

Motoscope Pro BMW R9T

For BMW R9T 2014, 2015,2016

Not compatible with BMW models R nineT Model 2017 and later, R nineT Urban G/S, R nineT Pure, R nineT Racer, R nineT Scrambler

The BMW R9Te pro motoscope is the only Plugand Ride on the market.

The CAN-Bus interface of the motoscope pro allows the complete display of all the original functions (except the settings for the heated grips).

The connector The original wiring harness makes the instrument a true plug and ride and very simple installation. An LED matrix display allows for an ultra-thin case design.

The 734 LEDs, controlled by a 16-bit RISC processor, create a nearly bezel-less, self-illuminated display. It provides optimal readability even in direct sunlight conditions. Automatic brightness control is a no-brainer. The rev counter is displayed fully modular via the analog LED strip with drag indicator function. The primary and secondary displays are user configurable. Another display section shows the gear engaged. Four LEDs are pre-installed and can be used for many more input signals. The machined aluminum housing is CNC machined and mounts easily through two threaded holes on the back. The instrument is equipped with ABE approval.

< /p>

SUPPORT NOT PROVIDED, AVAILABLE SEPARATELY: BMW R9T pro motoscope support

Includes:< /strong>

Motoscope pro with approximately 70 cm Connection cable

2 stainless steel screws

Detailed installation and operating instructions

Specifications and features:

Length, Height, Depth 109 mm / 47 mm / 11 mm

Weight approx. 100g

Assembly 2 M3 threaded holes

Power consumption during operation max. 200 mA (depends on load)

Standby power consumption 0.4 mA Operating voltage 9 V - 15 V

Operating temperature -20 ° ... + 80 ° C

< p class="tw-data-text tw-ta tw-text-small" dir="ltr">Tachometer (LED bargraph) 0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)

Speedometer 0 - 350 km/h or mph

Travel meter A bis 999.9 km or mi

Trip counter B bis 999.9 km or mi p>

Total mileage (adjustable ) of 250000 km or mi

Operating hours / Service 0 - 9999.5 h

Clock 23:59 h / min

Time indication 0 - 99:59:59 h / min / s

Number of revolutions per minute (numeric) 0 - 20000 rpm < /span>

RÃ warning ©adjustable speed (shift indicator light) 0 - 20000 rpm

Voltage on board 9 - 18 V

Low voltage warning

Warning if below approx. 11V

Indication of the hour 0 - 100 km/h or 0 - 60 mph 0.00 - 30.59 sec.

Acceleration rà ©elle +/- 0.00 - 1.50 G

Average speed 0 - 350 km/h or mph

Max. speed 0 - 350 km/h or mph

Max. RPM 0 - 20000 rpm

Max. positive acceleration + 1.50 G

Max. negative acceleration - 1.50 G

Speed display N, speed 1 - 6

Green control LED Neutral (N)

Green control LED Flashing left / right

LED blue control High beam

Red control LED

Various warning functions such as Check Engine, ABS, Low Fuel Low fuel / fuel reserve warning

ACP
ACP1769
New
Comments (0)
No customer reviews for the moment.

Related Product

32 other products in the same category:

New Account Register

Already have an account?
Log in instead Or Reset password