The E3 single ground electrode incorporates the combined benefits of several known performance spark plug types along with new science based on years of spark plug research. The 3 main performance components of the E3 DiamondFIRE are.
? Open Ground Electrode Design This mimics surface spaced spark plugs like the type used in rotary engines which direct the flame core to the piston more directly than traditional J-wire designs. The open section at the top of the electrode avoids the creation of the donut-shaped flame core, the faster you can direct the flame to the area above the piston, the better the combustion.
? Forward Projection into Spark Zone
With the plugs retracted, the generated spark rests against the top of the combustion chamber surface. The E3 ground electrode is designed to project further forward into the combustion chamber. This brings the spark zone closer to the areas of good mixing. The outward projection also creates beneficial "micro-aerodynamics" in the spark zone. The initial combustion wave leaves the spark zone at supersonic speeds and the raised edge of the E3 electrode produces a chimney effect when.
? Edge-to-Edge Spark Discharge
The most powerful part of the E3 electrode design is the forced edge-to-edge spark discharge, which has proven to be the best way to direct a spark when it leaves the surface of the electrode. Sharp edges are better for initiating migrations and accelerated electrons collide inside the spark zone.
32 other products in the same category:
Français
English
Deutsch
Español