Les plaquettes de frein EBC ont une grande puissance de freinage prévisible et bénéficient d'une faible abrasion du disque et de la poussière. Ils sont respectueux des disques de frein et freinent plus lentement sur le mouillé. Ces plaquettes de frein organiques sont approuvées par le test de sécurité des freins ECE R 90. Remarque : Vérifiez auprès de votre revendeur MCS local ou du service commercial MCS le type exact d'approbation et la validité du modèle de vélo et les années indiquées sur le rapport de test. - taille / ajustements: Rear: BMW : 05-09 HP2 Enduro; 07-10 HP2 Megamoto (Disc has fixed bobbins - Fitting kit required); 08-11 HP2 Sport (Disc has fixed bobbins - Fitting kit required); 10-11 K1300 GT SE (Disc has fixed bobbins - Fitting kit required); 09-11 K1300 GT (4.5mm thick disc. Fitting kit required. Check disc thickness); 12 K1300 S HP (Disc has fixed bobbins - Non and ABS Models); 16-20 R Nine T Café Racer K32/1170cc (Disc has fixed bobbins - Fitting kit required); 14-20 R Nine T K21/1170cc (Disc has fixed bobbins - Fitting kit required); 16-21 R Nine T Pure K22/1170cc (Disc has fixed bobbins-fitting kit required); 16-21 R Nine T Scrambler K21/1170cc (Disc has fixed bobbins-fitting kit required); 17-21 R Nine T Urban GS (K33/1170cc) (Disc has fixed bobbins-fitting kit required); 20-21 R Nine T /5 K21/1170cc (Disc has fixed bobbins-fitting kit required); 93-99 R1100 GS (STD & ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 94-96 R1100 R 1993-May 1996 (Spoke wheel); 93-01 R1100 R (Cast Wheel - Remove rotor outer ring from centre casting and refit. ); 94-01 R1100 RT (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 94-01 R1100 RT (Spoke wheel); 96-00 R1100 S 1996-Nov. 2000 (ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-06 R1100 S Dec. 2000-2006 (With Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-06 R1100 S Dec. 2000-2006 (Without Integral ABS); 01 R1150 GS Adventure Evo R21A 0441/0492 (July-2001-2006 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 02-06 R1150 GS Adventure Evo R21A 0441/0492 - July 2001-2006 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 01 R1150 GS Evo R21/0415/0495 (Nov. 2001-2003 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 02-03 R1150 GS Evo R21/0415/0495 - Nov. 2001-2003 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 98 R1150 GS R21/0415/0495 (1998-Oct. 2001 - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 99-01 R1150 GS R21/0415/0495 - 1998-Oct. 2001 (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 03-06 R1150 R Rockster; 04 R1150 R Rockster Edition 80; 01-06 R1150 R; 01-04 R1150 RS (Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-06 R1150 RT (Integral ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 00-02 R1200 Independent (Cast wheel); 00-02 R1200 Independent (Spoke wheel); 03-04 R1200 C Classic (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 03-04 R1200 C Independent (Cast Wheel - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 04 R1200 C Montauk (Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-02 R1200 C (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-02 R1200 C (Spoke Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 11 R1200 GS 30 Years (Spoke Wheels - Disc has fixed bobbins); 10-13 R1200 GS Adventure (Spoke Wheels - Disc has fixed bobbins); 11 R1200 GS Adventure - 30 Years (Spoke Wheels - Disc has fixed bobbins); 12 R1200 GS Adventure - Triple Black (Disc has fixed bobbins); 05 R1200 GS Adventure K25/0382 (Nov.2005-2007 - Spoke Wheels - Disc has fixed bobbins); 06-07 R1200 GS Adventure K25/0382 - 2005-Nov. 2007 (Spoke Wheels - Disc has fixed bobbins); 06-09 R1200 GS Adventure/M K25/0380/ (Spoke Wheels - Disc has fixed bobbins); 02 R1200 GS K25/0307 (2002. Nov-2007 - Discs fitting kit required); 03-07 R1200 GS K25/0307 - 2002-Nov. 2007 (Discs fitting kit required); 06-09 R1200 GS M K25/0303 (Cast/Spoke Wheels - Disc has fixed bobbins); 12 R1200 GS Rallye (Disc has fixed bobbins); 11-13 R1200 GS Triple Black (Spoke Wheels - Disc has fixed bobbins); 10-11 R1200 GS (Cast Wheels - Disc has fixed bobbins); 11-13 R1200 R Classic (Disc has fixed bobbins Fitting kit required); 06-07 R1200 R K27/0378 (Disc has fixed bobbins - Fitting kit required); 07 R1200 R K27/0378 (Dec.2007-2014 - Disc has fixed bobbins - Fitting kit required); 08-13 R1200 R K27/0378 - Dec. 2007-2014 (Disc has fixed bobbins - Fitting kit required); 10-11 R1200 R SE (Disc has fixed bobbins - Fitting kit required); 05-07 R1200 RT K26/0368 (Brembo caliper - disc has loose buttons); 07 R1200 RT K26/0368 (Dec-2007-2009 - Disc has fixed bobbins - Fitting kit required); 08-09 R1200 RT K26/0368 - Dec. 2007-2009 (Disc has fixed bobbins - Fitting kit required); 10-13 R1200 RT K52 (Disc has fixed bobbins fitting kit required); 10-13 R1200 RT SE K52 (Disc has fixed bobbins fitting kit required); 06 R1200 S K29/0366 (Nov-2006-2007 - Discs have loose bobbins); 07 R1200 S K29/0366 (Dec. 2007-2008 - Disc has fixed bobbins - Fitting kit required); 07 R1200 S K29/0366 - 2006-Nov. 2007 (Discs have loose bobbins); 08 R1200 S K29/0366 - Dec. 2007-2008 (Disc has fixed bobbins - Fitting kit required); 07 R1200 ST K28/0328 (Dec-2007-2008 - Disc has fixed bobbins - Fitting kit required); 03 R1200 ST K28/0328 (Nov-2003-2007 - Discs have loose bobbins); 04-07 R1200 ST K28/0328 - 2003-Nov. 2007 (Discs have loose bobbins); 08 R1200 ST K28/0328 - Dec. 2007-2008 (Disc has fixed bobbins - Fitting kit required); 97-00 R850 C (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 97-00 R850 C (Spoke Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-00 R850 GS (STD & ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place. Remove outer ring fom centre casting and refit.); 94 R850 R (1994-May 1996 - Spoke wheel); 94-02 R850 R (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 04-06 R850 R; 95-96 R850 R - 1994-May 1996 (Spoke wheel); 96-01 R850 RT (Cast Wheel - ABS - Remove ABS ring from old rotor and refit to new EBC rotor. Note: Ensure all mounting surfaces are clean and when refitting bolts use a thread lock cement to hold them in place.); 96-01 R850 RT (Spoke wheel); 06 R850 RT; 15-18 S 1000 XR K49 (Disc has fixed bobbins - Fitting kit required); 18-20 S 1000 XR K69 (Carbon wheels); 19-20 S 1000 XR K69 (Disc has fixed bobbins - Fitting kit required)
Français
English
Deutsch
Español
